2025 Jeep® Wagoneer S in Johnson City, TN
2025 Jeep® Wagoneer S in Johnson City, TN
The 2025 Jeep® Wagoneer S represents a new generation of premium sport-utility vehicles powered entirely by electric engineering. Built on the STLA-Large unibody platform, it combines a sealed and waterproof battery system with advanced motor technology, refined aerodynamics, and versatile capabilities. With its four-door multipurpose design, it belongs to the EPA multipurpose vehicle class and demonstrates a balance of efficiency, space, and performance.
Battery and Charging Capabilities
At the foundation of the 2025 Jeep® Wagoneer S is a 400-volt, 100.5-kWh lithium-ion nickel manganese cobalt battery pack. Designed with a 131Ah-cell structure, the system is fully sealed to resist water intrusion and protect all high- and low-voltage electronics. This battery delivers an estimated driving range of 294 miles on a single charge. Charging options are designed for different needs. Using a Level 1 120-volt source, the vehicle can be recharged from 20 to 80 percent in approximately 32 hours. A Level 2 240-volt source reduces the 20 to 80 percent charging time to around 6 hours. DC fast charging achieves the same replenishment in about 23 minutes, and the integrated dual charging module with an onboard charging module enables up to 100 miles of range in just 10 minutes when connected to public DC fast charging stations.
Performance and Propulsion
The 2025 Jeep® Wagoneer S delivers powerful output through front and rear electric drive modules. On the Launch Edition, both front and rear modules are rated at 250 kW, delivering a combined output of 600 horsepower and 617 pound-feet of torque. The Limited configuration includes a 150 kW front motor and a 250 kW rear motor, producing 500 horsepower and 524 pound-feet of torque. Acceleration is one of its defining qualities, reaching 60 miles per hour in 3.4 seconds with the Launch Edition and under 4 seconds with the Limited. Top speed reaches 124 miles per hour. Efficiency is equally notable, with up to 93 MPGe combined, 100 MPGe in city driving, and 85 MPGe on highways.
Cooling and Thermal Management
To maintain performance consistency, the 2025 Jeep® Wagoneer S integrates a dedicated vehicle cooling module. This system includes an OHX condenser, a low-temperature radiator, and an electric fan assembly. These components ensure that the battery and motors maintain stable operating conditions even under heavy demand. A coolant capacity of 13.5 quarts, or 12.8 liters, provides sufficient volume to regulate heat across the vehicle’s systems.
Drivetrain and Transfer System
Power is distributed through a one-speed transfer case that delivers full-time active four-wheel drive. Torque distribution between the front and rear axles is variable, automatically adapting to selected driving conditions. Modes include Auto, Sport, Eco, Snow, and Sand, allowing the vehicle to adjust traction and handling across surfaces and environments. The system does not include a low-range gear ratio but retains the adaptability expected of a capable utility vehicle. Both the front and rear axles use open differentials with an 11:1 ratio.
Suspension and Steering Design
Ride control is managed by a MacPherson® strut suspension in the front and an integral link system in the rear. These configurations are designed for stability, comfort, and handling accuracy. Steering uses an electric rack-and-pinion system with a 15.1 overall ratio. The steering wheel requires 2.54 turns lock-to-lock, and the turning diameter measures 40 feet curb-to-curb, allowing maneuverability for a vehicle of this size.
Braking Components
The braking system consists of hydraulic disc brakes at both the front and rear. The front features 13.9 by 1.1-inch vented discs paired with dual-piston floating calipers measuring 2.0 inches each. Swept area coverage measures 196 square inches, or 1,264.62 square centimeters. The rear includes 13.9 by 0.87-inch vented discs with a single-piston floating caliper of 2.0 inches, along with an integrated electronic parking brake. Rear swept area totals 162.1 square inches, or 1,045.77 square centimeters.
Aerodynamic Profile and Exterior Dimensions
The 2025 Jeep® Wagoneer S has been designed with efficiency in mind, resulting in a drag coefficient of 0.29. This streamlined figure is supported by an aero CdA measurement of 8.67 square feet, or 0.805 square meters. Its structural dimensions include a 113.0-inch wheelbase, an overall length of 192.4 inches, and an overall width of 83.6 inches when measured at the mirrors. Body width measures 74.8 inches. Vehicle height is 64.8 inches, measured both at the roof rail and antenna. Ground clearance is 6.4 inches, with 8.3 inches at the front axle and 7.3 inches at the rear axle. Approach, ramp breakover, and departure angles measure 19.2 degrees, 14.0 degrees, and 23.4 degrees respectively.
Interior Dimensions and Passenger Accommodations
The cabin of the 2025 Jeep® Wagoneer S is designed to optimize both passenger comfort and cargo flexibility. Total passenger volume is measured at 99.5 cubic feet. Front seat dimensions include 38 inches of headroom, 41.3 inches of legroom, 57.4 inches of shoulder room, and 55.4 inches of hip room. The seat travel range measures 8.7 inches. Second-row seating offers 37.4 inches of headroom, 38 inches of legroom, 3.5 inches of knee clearance, 57.6 inches of shoulder room, and 54.4 inches of hip room. Passenger volume for the second row is 47.4 cubic feet. Cargo capacity behind the second row measures 30.6 cubic feet, while cargo volume expands to 61.0 cubic feet behind the first row. Combined passenger and cargo volume reaches 130.1 cubic feet. The vehicle also includes a 3.0 cubic-foot front trunk for additional storage.
Weight Distribution and Capacity
The 2025 Jeep® Wagoneer S carries a gross vehicle weight rating of 6,700 pounds, with an estimated curb weight of 5,667 pounds. Payload capacity totals 1,033 pounds. Weight distribution is nearly even at 50.2 percent front and 49.8 percent rear.
Wheels, Tires, and Towing Ability
Wheels measure 20 by 8.5 inches and are offered in several finishes, including Gloss Black fully painted or Diamond Cut painted aluminum depending on trim and package selection. Tires are 235/50R20XL Falken all-season low rolling resistance models, rated at 707 revolutions per mile. Maximum trailer towing capacity reaches 3,500 pounds when properly equipped, supported by the standard axle ratio of 11:1.
Driver Safety and Control Systems
The design of the 2025 Jeep® Wagoneer S integrates multiple systems that promote driver control and safety. From its active four-wheel drive modes to its electronic parking brake and sealed electrical components, the engineering is focused on consistency and security under a wide range of driving conditions.
Schedule a Test Ride in Johnson City, TN
The 2025 Jeep® Wagoneer S brings together advanced battery technology, powerful dual-motor output, aerodynamic engineering, and a spacious interior with precise braking and steering systems. It is a complete technical achievement in the evolution of electric sport-utility vehicles. At Friendship CDJR of Johnson City in Johnson City, TN, we invite you to schedule a test drive and experience this vehicle directly. With rapid acceleration, 600 horsepower available, and charging solutions that reduce downtime, it sets a new standard for efficiency and capability. Its interior design, with generous passenger volume and versatile cargo capacity, adds practicality to its performance. Combined with a dependable four-wheel drive system and a towing capacity of 3,500 pounds, the 2025 Jeep® Wagoneer S is prepared for both daily use and long journeys. Visit us to arrange your test drive and see how this vehicle delivers precision and reliability on every road.
FRIENDSHIP CDJR OF JOHNSON CITY
3700 Bristol Hwy,
Johnson City, TN 37601
Driving Directions
423-482-8560
423-482-8883
423-482-8458
Close